- Volume: 200L | 1000L
- Quality level:
- DIN 51517 Parte 3 CLP- AIST 224 (US Steel 224)- ISO-L-CKD- AGMA 9005-F16 (Former 9005-E02-EP)- ISO 12925-1 CKD- David Brown S1.53.101
REPSOL MAKER TAURO 220
REPSOL MAKER TAURO 220 have been developed for applications in industrial gear assemblies with high load requirements and harsh environments.
Its careful formulation incorporates the highest quality bases and additives, improving its extreme pressure and anti-rust performance, its anti-foaming capacity and its resistance to oxidation.
It is suitable for all kinds of industrial gearboxes, bearings and multipliers, using splash or circulating lubrication.
| No | Information | Unit | Method | Index | Index |
| 1 | ISO Level | - | - | 150 | 220 |
| 2 | Viscosity at 100°C | cSt | ASTM D 445 | 14.5 | 19 |
| 3 | Viscosity at 40°C | cSt | ASTM D 445 | 150 | 220 |
| 4 | Viscosity index | - | ASTM D 2270 | 97 | 95 |
| 5 | Flash point | °C | ASTM D 92 | 260 | 260 |
| 6 | Freezing point | °C | ASTM D 97 | -9 | -9 |
| 7 | Water separation ability | - | ASTM D 2711 | - | - |
| 8 | - Manual water | cm3 | - | Minimum 37 | Minimum 37 |
| 9 | - Emulsion | cm3 | - | Maximum 1 | Maximum1 |
| 10 | Corrosion reaction of copper (Cu) after 3 hours at 100°C | - | ASTM D 130 | 1b | 1b |
| 11 | Khả năng chống gỉ | - | mg KOH/g | Pass | Pass |
| 12 | TAN | - | ASTM D 664 | 0.2 | 0.2 |
| 13 | Water splitting ability | Minutes | ASTM D 664 | Below 30 | Below 30 |
| 14 | FZG pitting load | - | DIN 51354 | Pass | Pass |
| 15 | Timken load | lbs | ASTM D 2782 | Minimum 60 | Minimum 60 |
Technical document: MAKER_TAURO
Description
-
- Reduce wear under boundary lubrication conditions and extreme pressure
- Excellent thermal stability
- Very good protection against rust, preventing steel corrosion
- High de-emulsifying capacity (quick separation from water)
- Good antifoaming characteristics.
- Resistance to the rupture of the lubricant film.
