- Volume: 4L
- Lubricity: 5W-40
- Quality level: API SN/CF và ACEA C3
LEADER C3 5W-40
LEADER C3 5W-40 is synthetic lubricant for most car manufacturers light petrol and diesel engines.
This product is compatible with vehicles equipped with a DPF.
Its reduced ash content formula (Mid SAPS) makes it suitable for exhaust gas post-treatment technologies, while at the same time contributing to preserving the environment by minimising harmful particle emissions.
| No | Information | Unit | Method | Index |
| 1 | Density at 15°C | g/mL | ASTM D 4052 | 0.852 |
| 2 | Viscosity at 100°C | cSt | ASTM D 445 | 14.6 |
| 3 | Viscosity at 40°C | cSt | ASTM D 445 | 87 |
| 4 | Viscosity at -30°C | cSt | ASTM D 5293 | Maximum 6,600 |
| 5 | Viscosity index | - | ASTM D 2270 | 170 |
| 6 | Flash point, open cup | °C | ASTM D 92 | Minimum 215 |
| 7 | Dropping point | °C | ASTM D 97 | -36 |
| 8 | Total alkalinity index | mgKOH/g | ASTM D 2896 | 7.4 |
| 9 | Viscosity at 100°C after Bosch injector cutting | cSt | CEC-L-14-93 | 12.5 |
Technical document: LEADER_C3_5W-40
Description
- Recommended for the petrol and diesel engines of a wide range of vehicle manufacturers.
- Its low ash content is necessary for the durability of the new emission reducing technologies such as the diesel particle filter (DPF), thus helping more than conventional lubricants to preserving the environment.
- It contributes to limited formation of deposits and sludge by keeping the engine clean.
- It protects the engine against wear by offering good resistance to rust and to breakage of the lubricant film due to shearing.
